[c-nsp] cli auto-complete on configured names
Ted Pelas Johansson
tedpelas at gmail.com
Thu Sep 3 00:59:04 EDT 2020
XR has been having it for years, but they are slow at adding it to all sections in the configuration. prefix-sets, route-policies, as-sets have had it for some time as well as ACLs, but there is a lot more too be done, unfortunately.
Best Regards
Ted
> On 2 Sep 2020, at 23:47, aaron1 at gvtc.com wrote:
>
> RP/0/0/CPU0:r22#sh mpls traffic-eng tunnels name ?
>
> r22--->r20 Tunnel name (if contains space, enclose name with " ")
>
> r20--->r22 Tunnel name (if contains space, enclose name with " ")
>
> r25_t101 Tunnel name (if contains space, enclose name with " ")
>
> WORD Tunnel name (if contains space, enclose name with " ")
>
>
>
> RP/0/0/CPU0:r22#sh mpls traffic-eng tunnels name r22--->r20
>
>
>
>
>
> Beautiful. Whoever coded this must've spent some time working with Juniper
> on Junos.
>
>
>
> I rarely ever see IOS/XE/XR have an auto-complete (tab key) on configured
> names of items.
>
>
>
> Thanks!
>
>
>
>
>
> Aaron
>
> aaron1 at gvtc.com
>
>
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list