[c-nsp] EOBC0/0 ifInErrors

[Nick Hilliard]

Aaron wrote on 30/09/2020 20:11:
> He is suggesting reseating all cards. Starting with the Supervisor.

correct. power down the box, carefully reseat all cards, power up, see 
if that fixes it.

If it doesn't fix it, then open a TAC case.  If the unit isn't under 
support, then you have a problem because this type of error could be one 
of the cards, or the sup, or the backplane and it's really hard to tell 
which without swapping units out.  If you can check out the EOBC on the 
line cards using remote login, that might give useful information, maybe.

Nick