[c-nsp] EOBC0/0 ifInErrors

[Aaron]

you could deduce if it is a line card or by adding 1 line card at a time.

On Wednesday, September 30, 2020, Nick Hilliard <nick at foobar.org> wrote:

> Aaron wrote on 30/09/2020 20:11:
>
>> He is suggesting reseating all cards. Starting with the Supervisor.
>>
>
> correct. power down the box, carefully reseat all cards, power up, see if
> that fixes it.
>
> If it doesn't fix it, then open a TAC case.  If the unit isn't under
> support, then you have a problem because this type of error could be one of
> the cards, or the sup, or the backplane and it's really hard to tell which
> without swapping units out.  If you can check out the EOBC on the line
> cards using remote login, that might give useful information, maybe.
>
> Nick
>