[c-nsp] RSP720 fabric channel speed

[Eugene Grosbein]

13.05.2021 8:29, Paul wrote:

> Is this -S chassis?

No, old one.

> send output of show redundancy (this is probably the problem here)

>> #show module
>> Mod Ports Card Type                              Model              Serial No.
>> --- ----- -------------------------------------- ------------------ -----------
>>    2   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       SAD095100KW
>>    3    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SAL11413Y50
>>    4    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SAL1206FSRB
>>    5    2  Route Switch Processor 720 (Hot)       RSP720-3CXL-GE     SAL1631JGQP
>>    6    2  Route Switch Processor 720 (Active)    RSP720-3CXL-GE     JAE11484O8V

asbr#show redundancy
Redundant System Information :
------------------------------
       Available system uptime = 1 year, 45 weeks, 3 days, 21 hours, 11 minutes
Switchovers system experienced = 0
              Standby failures = 0
        Last switchover reason = none

                 Hardware Mode = Duplex
    Configured Redundancy Mode = sso
     Operating Redundancy Mode = sso
              Maintenance Mode = Disabled
                Communications = Up

Current Processor Information :
-------------------------------
               Active Location = slot 6
        Current Software state = ACTIVE
       Uptime in current state = 1 year, 45 weeks, 3 days, 21 hours, 11 minutes
                 Image Version = Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.3(3)S2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 31-Jan-14 22:23 by prod_rel_team
                          BOOT = sup-bootdisk:c7600rsp72043-adventerprisek9-mz.153-3.S2.bin,12;
                   CONFIG_FILE =
                       BOOTLDR =
        Configuration register = 0x2102

Peer Processor Information :
----------------------------
              Standby Location = slot 5
        Current Software state = STANDBY HOT
       Uptime in current state = 1 year, 45 weeks, 3 days, 21 hours, 7 minutes
                 Image Version = Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.3(3)S2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 31-Jan-14 22:23 by prod_rel_team
                          BOOT = sup-bootdisk:c7600rsp72043-adventerprisek9-mz.153-3.S2.bin,12;
                   CONFIG_FILE =
                       BOOTLDR =
        Configuration register = 0x2102