[c-nsp] RSP720 fabric channel speed

[Paul]

Old chassis so it doesn't support hot fabric, that's all. the -E and -S 
chassis do


On 5/13/2021 4:54 AM, Eugene Grosbein wrote:
> 13.05.2021 8:29, Paul wrote:
>
>> Is this -S chassis?
> No, old one.
>
>> send output of show redundancy (this is probably the problem here)
>>> #show module
>>> Mod Ports Card Type                              Model              Serial No.
>>> --- ----- -------------------------------------- ------------------ -----------
>>>     2   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       SAD095100KW
>>>     3    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SAL11413Y50
>>>     4    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SAL1206FSRB
>>>     5    2  Route Switch Processor 720 (Hot)       RSP720-3CXL-GE     SAL1631JGQP
>>>     6    2  Route Switch Processor 720 (Active)    RSP720-3CXL-GE     JAE11484O8V
> asbr#show redundancy
> Redundant System Information :
> ------------------------------
>         Available system uptime = 1 year, 45 weeks, 3 days, 21 hours, 11 minutes
> Switchovers system experienced = 0
>                Standby failures = 0
>          Last switchover reason = none
>
>                   Hardware Mode = Duplex
>      Configured Redundancy Mode = sso
>       Operating Redundancy Mode = sso
>                Maintenance Mode = Disabled
>                  Communications = Up
>
> Current Processor Information :
> -------------------------------
>                 Active Location = slot 6
>          Current Software state = ACTIVE
>         Uptime in current state = 1 year, 45 weeks, 3 days, 21 hours, 11 minutes
>                   Image Version = Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.3(3)S2, RELEASE SOFTWARE (fc3)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2014 by Cisco Systems, Inc.
> Compiled Fri 31-Jan-14 22:23 by prod_rel_team
>                            BOOT = sup-bootdisk:c7600rsp72043-adventerprisek9-mz.153-3.S2.bin,12;
>                     CONFIG_FILE =
>                         BOOTLDR =
>          Configuration register = 0x2102
>
> Peer Processor Information :
> ----------------------------
>                Standby Location = slot 5
>          Current Software state = STANDBY HOT
>         Uptime in current state = 1 year, 45 weeks, 3 days, 21 hours, 7 minutes
>                   Image Version = Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.3(3)S2, RELEASE SOFTWARE (fc3)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2014 by Cisco Systems, Inc.
> Compiled Fri 31-Jan-14 22:23 by prod_rel_team
>                            BOOT = sup-bootdisk:c7600rsp72043-adventerprisek9-mz.153-3.S2.bin,12;
>                     CONFIG_FILE =
>                         BOOTLDR =
>          Configuration register = 0x2102
>
>