[c-nsp] ASR1009x and 10G thruput

[hank at interall.co.il]

> Can you review if you may be software switching, instead of QFP.

> show platform hardware qfp active infrastructure punt statistics
interface name te0/1/4
> show platform hardware qfp active infrastructure punt statistics
interface name te0/1/7
> show platform hardware qfp active infrastructure punt statistics type 
> per-cause

After a month of nearly daily debug with Cisco TAC, including numerous 
iperf and tcpdump sessions including escalation to the CATS (Core 
Architecture Team), and coming to a brick wall, it was decided to swap 
out the MIP100 and EPA10X10 cards.  After insertion of alternate cards, 
iperf jumped from 2.4G to 10G.  The faulty cards are now on their back 
to Cisco for diagnosis.

Thanks to all for their suggestions.

Regards,
Hank