[c-nsp] [External] Vague Recollection of command on modular catalyst switches

[Hunter Fuller]

What about "module provision <slot-number> first-insert" ? Maybe?


--
Hunter Fuller (they)
Router Jockey
VBH M-1C
+1 256 824 5331

Office of Information Technology
The University of Alabama in Huntsville
Network Engineering

On Fri, Nov 11, 2022 at 7:52 AM Drew Weaver via cisco-nsp
<cisco-nsp at puck.nether.net> wrote:
>
> Hello,
>
> The default when you replace a line card in a modular catalyst switch is that it removes the configuration for that line card.
>
> I have a vague recollection of there being a command that you could enter to tell it not to do this.
>
> Does anyone remember what that command is?
>
> It isn't a huge deal to copy/paste the config and then add 'no shutdown' on every port but if you can avoid having to do that....
>
> Thanks,
> -Drew
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/