[c-nsp] ASR9902 fpd upgrade

[Mouniri Mdahoma]

Hello
What is the output of the following command

#admin show alarms brief

Le mer. 20 déc. 2023, 16:32, Drew Weaver via cisco-nsp <
cisco-nsp at puck.nether.net> a écrit :

> Hello,
>
> I've had a TAC case open on this for more than a week but after we
> upgraded an ASR9902 to 7.9.21 the FPD upgrade process is not completing.
>
> I've gotten it to this point:
>
> show hw fpd | i RLOAD
> Wed Dec 20 10:35:41.200 EST
> 0/RP0      A99-RP-F              1.0   Primary-BIOS         RLOAD REQ
> 33.29     33.30
> 0/RP1      A99-RP-F              1.0   Primary-BIOS         RLOAD REQ
> 33.29     33.30
> 0/0        ASR-9902-LC           1.0   Primary-BIOS         RLOAD REQ
> 34.28     34.30
> 0/0        ASR-9902-LC           1.0   Sunstreaker          RLOAD REQ
>  0.15      0.19
> 0/0        ASR-9902-LC           1.0   TAMFW-Sunstreaker    RLOAD REQ
>  2.65      2.72
>
> I've reloaded the entire router, I've reloaded the specific 'locations',
> and I've even pulled the power cords out of the router to see if it needs
> to 'cold start'.
>
> I'm clearly just banging my head against a wall at this point.
>
> Does anyone know how to resolve RLOAD REQ on these?
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>