[c-ubr] uBR7246VXR - RJ45

[LeeRNorman1 at aol.com]

Greetings from the Dallas area - 
 
I have a uBR7246VXR with a  uBR7200-I/O-FE  (I/O Controller) that  I can't 
get up & running.
 
1.  The RJ45-jack does not respond, nor does the LED beside it.   When I go 
into "Config Terminal" mode to assign the media-type as RJ45, I get a  
error.  But it will stay in MII (media-type) mode.
 
2.  The uBR7246VXR boots up in  "boot-mode".  It's stuck in  boot-mode.  
I've done the "confreg" thing, doesn't work.  How do I  format a flash-disk if 
it won't recognize the slot &/or disk?
 
Best Regards, 

Lee R. Norman.
972-736-3380 -  hm-ofc.
508-527-0370 - mobile
972-767-3740 - fax

_LeeRNorman1 at aol.com_ (http://mail/)  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-ubr/attachments/20091101/92c9f642/attachment.html>