[cisco-voip] ip phone: transfer call

[Lelio Fulgenzi]

This is normal for CCM 3.3.3 and lower. I believe it is 'fixed' in v3.3.4 and 4.x but I couldn't find anything in the release notes about it.

Essentially, a phone can have only two calls active at once per line. By pressing the transfer button, you are initiating a new call - when you already have two in queue, you can't initiate a third.

They have some way to work around it, but I don't like it:

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_tech_note09186a00800945a6.shtml


  ----- Original Message ----- 
  From: Leonardo D'Urso 
  To: cisco-voip at puck.nether.net 
  Sent: Thursday, July 22, 2004 10:22 AM
  Subject: [cisco-voip] ip phone: transfer call



  hi there,

  I have a strange problem of ip phones (7905/12/40/60). I have configured 
  on a line with a DN. The call waiting service is active.
  When I receive a phone call, I can transfer it on another phone.
  When I receive 2 calls, one hold and the other active, if I try to 
  transfer one of that (the active), I have that the tranfer soft button is 
  not usable.
  Is this normal?

  thanks in advance.
  Leo

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040722/41008514/attachment.html