[cisco-voip] ip phone: transfer call

[Wes Sisk]

Hi Leonardo,

This is working as designed.  With call waiting enabled, the 2nd call
occupies the phantom line appearance that we would normally use to setup the
2nd leg of the transfer.

This will be always be a limitation in CM versions earlier than 4.0(1) where
we support many (>2) calls per line appearance.

More Description:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186
a00800945a6.shtml

/Wes

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Leonardo D'Urso
> Sent: Thursday, July 22, 2004 10:23 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] ip phone: transfer call
>
>
>
> hi there,
>
> I have a strange problem of ip phones (7905/12/40/60). I have configured
> on a line with a DN. The call waiting service is active.
> When I receive a phone call, I can transfer it on another phone.
> When I receive 2 calls, one hold and the other active, if I try to
> transfer one of that (the active), I have that the tranfer soft button is
> not usable.
> Is this normal?
>
> thanks in advance.
> Leo
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip