[cisco-voip] Call Manager Cluster Directory Syncing

[Lelio Fulgenzi]

We've gone with option number four. Our development area customized it quite nicely. With a little work, you can actually use the IP address of the phone to display the numbers to dial correctly. For example, our LDAP directory has numbers/extensions from a number of areas around Ontario, some long distance. We've modified the numbers to work for our IP address by default, but the developers said by plugging in the subnet/ip address range of different locations, they would be able to plug in a 1+ area code where necessary.

Not sure if any of the other ways would have such flexibility to present the number based on the location of the phone.

-----                                                                -----
Lelio Fulgenzi, B.A.                                  lelio at uoguelph.ca.eh
Network Analyst (CCS)
University of Guelph                             FAX:(519) 767-1060 JNHN
Guelph, Ontario N1G 2W1                          TEL:(519) 824-4120 x56354
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
     remove the 1st letter of the canadian alphabet from my email, eh!
  ----- Original Message ----- 
  From: Wes Sisk 
  To: Vandy Hamidi ; cisco-voip at puck.nether.net 
  Sent: Thursday, July 29, 2004 4:33 PM
  Subject: RE: [cisco-voip] Call Manager Cluster Directory Syncing


  IMHO -
  depends on your motivation.  I've seen all of the following, each with its
  own pros and cons:

  1. setup an ipphone service on cluster1 that points to cluster2's directory
  URL

  2. use BAT to export all users from cluster2 and import them to cluster1

  3. integrate both clusters to AD, using different CiscoOU's, but using the
  same user base

  4. use the LDAP search in the ipphone services SDK to write your own LDAP
  search page

  /Wes

  > -----Original Message-----
  > From: cisco-voip-bounces at puck.nether.net
  > [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Vandy Hamidi
  > Sent: Thursday, July 29, 2004 3:45 PM
  > To: cisco-voip at puck.nether.net
  > Subject: [cisco-voip] Call Manager Cluster Directory Syncing
  >
  >
  > There has to be a way to do this, though I can't figure out how.
  >
  > Adding a NEW Cluster for our International office.  I want the
  > users/phones in that Cluster to be able to lookup users in my existing
  > cluster.
  >
  > So when the user hit's directory-->Corporate directory, they can look me
  > up even those I'm homed to my San Francisco Cluster.
  >
  > How can I sync the two directories automatically w/o manually entering
  > each one.
  >
  > Thanks in advanced,
  >
  > -=Vandy=-
  >
  >
  >
  > _______________________________________________
  > cisco-voip mailing list
  > cisco-voip at puck.nether.net
  > https://puck.nether.net/mailman/listinfo/cisco-voip

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040729/202dba62/attachment.html