[cisco-voip] callmanager 4.x to avaya using qsig t1 mgcp

[Ryan Ratliff]

Which party is dialing out?  If it's an IP phone registered with CM try 
waiting 15 seconds or so to see if the call goes out.

-Ryan
On Nov 9, 2004, at 3:47 PM, michaelreilly at nc.rr.com wrote:

> I have set up a 3745 gateway to use t1 qsig with an avaya definity 
> g3,i am able to get the gateway to register and get dial tone. I do a 
> show voice call active on the gateway and see the call up, but it 
> looks like my dtmf is not cutting through, when I try to dial out 
> nothing happens. Any ideas?
>
> Thanks,
> Mike
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>