[cisco-voip] Cat 4506 w/ SRST and AGM

[Walenta, Phil]

If I remember things correctly, the AGM has been discontinued.  You may
want to factor that into your choice (as in using an external gateway
product). 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Vandy Hamidi
Sent: Tuesday, November 09, 2004 2:29 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cat 4506 w/ SRST and AGM

Putting up a new office and I want to use a 4506 as the core switch (ILP
for the phones) and also terminate my WAN and PRI connections.

What are the pros and cons of going with a 4500 for the core switch/wan
router?

Here is a summary:
-Call Manager is Remote (across the WAN) -Need to support Conferences
-Need to support 90 Phones in SRST
-1 Voice PRI
-1 Wan T1's

I'm looking at a:
4506
SupII Plus
WS-X4604-GWY (terminate WAN/PRI/Conference/XCODE) 2xPWR-C45-1300ACV
(1300 Watt Voice enabled PS)

What else do I need?
DSPs (how many?)
Special modules (other than VWIC-2MFT, etc)?

Can the 4506 SupII have dial peers?
MGCP?
H323?

I normally install a 3725 with Stand alone switches, but wanted a
unified switch and router with redundant power.

Any suggestions are welcome and most appreciated, Thank you,

	-=Vandy=-


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip