[cisco-voip] Re: Meetme

[Lelio Fulgenzi]

With Call Manager v4.1(2) you can use FAC/CMC with route patterns. People are using this feature to implement quite a few 'password' based applications. Route patterns are typically used for offnet access, but v4.1(2)  seems to have introduced the option of on-net routing. You should be able to create a route pattern that requires a FAC/CMC and then drop a few digits and dial the meet-me conference. 

This, of course, is all hypothetical. ;)

Lelio

P.S. If you are using 4.0(2), you might want to check to see that these features are available, they just might be.

-----                                                                -----
Lelio Fulgenzi, B.A.                                  lelio at uoguelph.ca.eh
Network Analyst (CCS)
University of Guelph                             FAX:(519) 767-1060 JNHN
Guelph, Ontario N1G 2W1                          TEL:(519) 824-4120 x56354
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
     remove the 1st letter of the canadian alphabet from my email, eh!
  ----- Original Message ----- 
  From: Nick Marus 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, November 09, 2004 9:47 PM
  Subject: [cisco-voip] Re: Meetme


  Ok I think I found out something from another mailing list. It is as follows:

  >You can not create a password for the meetme, but if you have a VM
  system >such as Unity you can use it as a work around by:
  >
  >put the meetme in a partion that only VM, and the conference initator
  can get to.
  >
  >Give Unity an ext that every can call
  >
  >set that ext. the tranfer to the meetme numbe with a supervised
  transfer. Use th >following settings- "ask callers name", "annouce",
  and "confirm"
  >
  >This will beep into the conf and say the callers name then ask if you
  want to >accept or reject.
  >
  >This is no a password but it allows you to know each person as they
  get in and >to disallow people from joining that shouldn't be there.



  On Tue, 9 Nov 2004 20:07:53 -0500, Nick Marus <nmarus at gmail.com> wrote:
  > Has anyone figured out a creative way to get a meetme conference
  > initiated from a non ip telephone?
  > 
  > For example, I have a conference room phone, analog, want it to join a
  > meetme conference. Also would like to associate a DID that outcallers
  > could access, maybe frontend it with a cra script that does does basic
  > user/pin management.
  > 
  > CM 4.0, also have a IPCC express 3.5. I figure there has to be some
  > way of doing this. Found no straight forward answers on cco yet.
  > 
  > The only way I know how to use this is from one of the 79xx phone
  > through the menu..
  > 
  > --
  > Nick Marus
  > nmarus at gmail.com
  > 


  -- 
  Nick Marus
  nmarus at gmail.com
  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20041109/f543494d/attachment.html