[cisco-voip] Inbound Calls [Dead Silent]

[Tamer Mohamed Bayomy]

Thanks Paulo for your reply.. 
please find below portion of show version command for both GWs..


GW 1
==============

Cisco IOS Software, 3700 Software (C3745-IPVOICE-M), Version 12.3(7)T1,
RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport Copyright (c)
1986-2004 by Cisco Systems, Inc. Compiled Thu 22-Apr-04 02:31 by eaarmas

ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)

===============

GW2
===============

Cisco IOS Software, C2600 Software (C2600-IPVOICE-M), Version 12.3(7)T1,
RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport Copyright (c)
1986-2004 by Cisco Systems, Inc. Compiled Thu 22-Apr-04 11:57 by eaarmas

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE
(fc1)

===============

Regards,
Tamer


-----Original Message-----
From: Paulo Pereira [mailto:pjp at paulo-pereira.net] 
Sent: Thursday, November 18, 2004 1:12 PM
To: Tamer Mohamed Bayomy
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Inbound Calls [Dead Silent]

Tamer,

I have heard of similar issues before.

My best advice to you is to seek TAC support as this is probably a bug
with your current code.

Paulo Pereira


<quote who="Tamer Mohamed Bayomy">
> Dear All,
>
> I'm using Cisco voice gateways and I'm having a problem where some
> inbound calls are completed successfully to their destinations but
when
> the other end answer the call both ends hear a dead silent.. Is there
> anyone experience the same problem..?!! How did you manage to overcome
> this problem?!! Any help?!!
>
> Note,
> Not all the calls are silent but only 10% silent calls.
>
> Regards,
> Tamer
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>


-- 
Paulo Jorge Pereira
IP Network Engineering, CCIE 6372