FW:Re: [cisco-voip] Inbound Calls [Dead Silent]

[Tamer Mohamed Bayomy]

Dear Marc,
This is my setup:

Client --> PBX ---> GW1 ---leased Line[VoIP]----> GW2 ----> PBX -->My
Agents
No firewalls are involved at all..

Where:

GW1 is:

CISCO2650XM 
Cisco 2600 Ser IOS IP VOICE [c2600-ipvoice-mz.12.3-7.T] 
IP Communications High-Density Digital Voice NM with 
2 T1/E1 [NM-HDV2-2T1/E1] 
48-Channel Packet Voice/Fax DSP Module 
64-Channel Packet Voice/Fax DSP Module 
2-Port RJ-48 Multiflex Trunk - E1 [VWIC-2MFT-E1] 
 

GW2 is:

CISCO3745 
Cisco 3745 Ser IOS IP VOICE [c3745-ipvoice-mz.12.3-7.T] 
IP Communications High-Density Digital Voice NM with 
2 T1/E1 [NM-HDV2-2T1/E1] 
48-Channel Packet Voice/Fax DSP Module 
64-Channel Packet Voice/Fax DSP Module 
2-Port RJ-48 Multiflex Trunk - E1 [VWIC-2MFT-E1]

Regards,
Tamer


-----Original Message-----
From: Hering, Marc [mailto:MHering at TheGaleCompany.com] 
Sent: Thursday, November 18, 2004 5:01 PM
To: Tamer Mohamed Bayomy
Subject: RE: [cisco-voip] Inbound Calls [Dead Silent]

I meant between the phones but ok :)

What kind of leased lines?  I am kind of forced to agree with one of the
other list members however, this sure does sound like a IOS or phone
load bug...

<M> 

-----Original Message-----
From: Tamer Mohamed Bayomy [mailto:tamer.bayomy at xceedcc.com] 
Sent: Thursday, November 18, 2004 9:49 AM
To: Hering, Marc
Subject: RE: [cisco-voip] Inbound Calls [Dead Silent]

Dear Marc,
Not at all, leased line connecting the 2 Gateways..
Regards,
Tamer

-----Original Message-----
From: Hering, Marc [mailto:MHering at TheGaleCompany.com]
Sent: Thursday, November 18, 2004 4:31 PM
To: Tamer Mohamed Bayomy
Subject: RE: [cisco-voip] Inbound Calls [Dead Silent]

Is there a PIX firewall in the way? 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tamer Mohamed
Bayomy
Sent: Thursday, November 18, 2004 5:58 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Inbound Calls [Dead Silent]

Dear All,

I'm using Cisco voice gateways and I'm having a problem where some
inbound calls are completed successfully to their destinations but when
the other end answer the call both ends hear a dead silent.. Is there
anyone experience the same problem..?!! How did you manage to overcome
this problem?!! Any help?!! 

Note,
Not all the calls are silent but only 10% silent calls.

Regards,
Tamer


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
 
 
 
 
 
 
 
The Gale Company is one of the largest real estate companies in the
industry with a global portfolio exceeding 60 million square feet of
office space.  For more information contact 973-301-9500 or visit
www.TheGaleCompany.com
 
 
 
 
 
 
 
The Gale Company is one of the largest real estate companies in the
industry with a global portfolio exceeding 60 million square feet of
office space.  For more information contact 973-301-9500 or visit
www.TheGaleCompany.com