[cisco-voip] 7960 firmware load P00306000400

[Hering, Marc]

I could be wrong,,(usually am) but isn't the 5.0 loads unsigned and the
6.0 loads signed?  IIRC once you put a signed load onto a phone you
cannot go back to an unsigned load (Again, I could be wrong)

<M> 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Candace Holman
Sent: Tuesday, November 23, 2004 3:44 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7960 firmware load P00306000400

I have a phone stuck with firmware load P00306000400 (6.0-3).  I set the
device record in CM (3.3.3) to force it to use P00305000400 (5.0-4) and
it will not pick up the older load on a reset.  There are no errors in
the status messages on the phone, and no tftp errors on the server.
Does anyone know a workaround?

Thanks,

=====================================================================
Candace Holman

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
 
 
 
 
 
 
 
The Gale Company is one of the largest real estate companies in the industry with a global portfolio exceeding 60 million square feet of office space.  For more information contact 973-301-9500 or visit www.TheGaleCompany.com