[cisco-voip] Unity voice ports

[Voll, Scott]

I thought so.  Thanks for the response.

Eventually I do want to use Unity AA.

Scott

-----Original Message-----
From: Carter, Bill [mailto:WCarter at sentinel.com] 
Sent: Friday, October 01, 2004 7:39 AM
To: Voll, Scott; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unity voice ports

I would re-install to get SQL.  Number of ports is hard to determine.
With calls to the main # route to a Unity AA?

 
Bill Carter
Sr. Business Communications Analyst
Sentinel Technologies, Inc.
217.391.5015 (IP Phone)
800.860.8102 (Dispatch)

__________________________________
Cisco Global IP Communications Partner of the Year - 2003
 
-----Original Message-----
From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Thursday, September 30, 2004 3:22 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity voice ports

Best practice.

Unity 4.0.4.

I'm moving to an MCS 7835 and installing 32 voice ports.  I have already
installed, but I'm not in production, and I installed MSDE rather then
SQL.  Would it make more sense to rebuild it and use SQL?  I only had 16
ports with my ICS but had to go to 32 with the MCS 7835.  I didn't know
I was going to have that many ports until I got to the licensing.

Along the same lines, how many ports am I going to need when I upgrade
to ~1000 UM boxes?  Is there a rule of thumb?

TIA

Scott


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip