[cisco-voip] IPCC Express CTI numbering practice

[Voll, Scott]

I use the DID for the Route Point and I just use an unused area for CTI
Ports.

For instance if my DIDs were 3xxx then I would use a range like 6xxx.

I have no idea if this is best practice, but it's what I've done.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim Medley
Sent: Tuesday, October 12, 2004 10:34 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] IPCC Express CTI numbering practice

Can anyone share their numbering scheme for CTI Route points and CTI
ports
in regards to IPCC Express?

I have played around with a few different numbering schemes and was just
curious what out people have come up with.

Tim Medley 




_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip