[cisco-voip] CLID problem

[Ryan Ratliff]

Your telco simply isn't allowing you to set the outbound clid.  It's 
most likely just a mechanism to prevent people spoofing numbers.

-Ryan
On Oct 13, 2004, at 3:48 PM, Medve Istvan wrote:

> Dear All,
>
> probaly a newby question:
>
> I try to configure a sip2pstn gateway on a cisco 2610 with 12.2(15)T14 
> IOS
> version. A BRI/TE interface connected to the PSTN.
>
> I would like to send CLID in an outgoing ISDN call. I tried everything 
> but
> allways get the following debug message:
>
> *Mar 22 11:44:19.026: ISDN BR1/0 EVENTd: process_bri_call: call id 
> 0x80E3,
> called_number 06309708684, speed 0, call type VOICE, calling_number
> 19997311
> *Mar 22 11:44:19.030: ISDN BR1/0 EVENTd: pak_private_number: Calling
> Number IE is being stripped
> *Mar 22 11:44:19.030: ISDN BR1/0 EVENTd: pak_public_number: Calling 
> Number
> IE is being stripped
>
> Why being stripped ? Is it a PSTN configuration problem or cisco
> configuration problem ? PSTN subscription is ok, outgoing call sends 
> the
> base number of my number range.
>
> thx,
> imedve
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>