[cisco-voip] CLID problem

[Medve Istvan]

Hi,

it was an IOS bug. Changing to 12.1(5)T19 works fine.

regards,
imedve


Ryan Ratliff wrote:
> Your telco simply isn't allowing you to set the outbound clid.  It's 
> most likely just a mechanism to prevent people spoofing numbers.
> 
> -Ryan
> On Oct 13, 2004, at 3:48 PM, Medve Istvan wrote:
> 
>> Dear All,
>>
>> probaly a newby question:
>>
>> I try to configure a sip2pstn gateway on a cisco 2610 with 12.2(15)T14 
>> IOS
>> version. A BRI/TE interface connected to the PSTN.
>>
>> I would like to send CLID in an outgoing ISDN call. I tried everything 
>> but
>> allways get the following debug message:
>>
>> *Mar 22 11:44:19.026: ISDN BR1/0 EVENTd: process_bri_call: call id 
>> 0x80E3,
>> called_number 06309708684, speed 0, call type VOICE, calling_number
>> 19997311
>> *Mar 22 11:44:19.030: ISDN BR1/0 EVENTd: pak_private_number: Calling
>> Number IE is being stripped
>> *Mar 22 11:44:19.030: ISDN BR1/0 EVENTd: pak_public_number: Calling 
>> Number
>> IE is being stripped
>>
>> Why being stripped ? Is it a PSTN configuration problem or cisco
>> configuration problem ? PSTN subscription is ok, outgoing call sends the
>> base number of my number range.
>>
>> thx,
>> imedve
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
> 
> 
> 


-- 
Medve István
rendszer üzemeltetési vezetõ

EuroWeb Internet Szolgáltató Rt.
1138 Budapest, Váci út 141.
Tel: +36 1 8897-000
Fax: +36 1 8897-100
http://www.euroweb.hu