[cisco-voip] sip2pstn gw

[Jakob Schlyter]

On Sat, 16 Oct 2004, Medve Istvan wrote:

> Is there any way (radius based preferd) to modify CLID (received from sip
> invite message) before place a pstn call ?
> (eg. if sip:imedve at domain in From header fild, CLID will be 'imedve' but I
> would like to use a real pstn number from a predefined range)

IOS will use information from the Remote-Party-ID header to set the CLID. 
we set this header based on caller in the proxy handling all PSTN 
authentication etc.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_configuration_guide_chapter09186a00801fa1d9.html


 	jakob