[cisco-voip] Connect CCM to H.323 network

[George Dormishev]

Check you ANI and DNI that comes to CCM and back to the gateway see if they
match you dail plan!

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Alex A. Pavlenko
Sent: 22 Октомври 2004 г. 16:39
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Connect CCM to H.323 network

Hello everybody.

I try to connect CCM 4.0.1 to H.323 network controlled by
gatekeeper(OpenH323GK 
if it matters).
I completed following configuration steps:
1. Added gatekeeper "gk"
2. Added H.225 trunk called "CCM" with "gk" as value of gatekeeper name 
parameter
3. Added route group "grpGK" with member "CCM" trunk
4. Added route/hunt list "lstGK" with member "grpGK" route group
5. Added route pattern/hunt pilot with pattern [1-79]XXXXX and "lstGK"
6 Restarted Callmanager

Callmanager registers with gatekeeper successfully. But it drops either
incoming
or outgoing calls. In trace I found "Cisco CallManagerDigit analysis: 
potentialMatches=NoPotentialMatchesExist "
message. In case of outgoing call this message appears at the beginning of
call 
setup. When call is incoming
this message appears after receiving ACF and Q.931 Setup. After that
callmanager 
immediately
sends ReleaseComplete. For outgoing call I used verified number wich can be 
successfully reached with
any h.323 device connected to the same gatekeeper. For incoming call I used
one 
of DN's which also accessible
when calling from other IP phone.
What am I doing wrong?

PS. I'm new callmanager user so please don't kick :)
Thanks.

--
Alex Pavlenko
System Administrator
Sandy Info

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip