[cisco-voip] I'm clueless -- and anyone help

[Voll, Scott]

OK.  This looks like maybe what I'm looking for.  I found the drop down
on the gateway configuration.  I can choose internal (I assume that
clocks the line); external (I assume it gets it from the other end); and
then there's external primary, external secondary 1,2,3,3,...17.

Which ones would I set accordingly?  

3/0 primary?
3/1 secondary 1
3/1 secondary 1
3/1 secondary 1
-----Original Message-----
From: Jakub Klausa [mailto:jacke at bofh.pl] 
Sent: Tuesday, October 26, 2004 8:37 AM
To: Voll, Scott
Subject: Re: [cisco-voip] I'm clueless -- and anyone help

On Tue, Oct 26, 2004 at 07:22:59AM -0700, Voll, Scott wrote:

=> My PBX vendor says that I need to clock for the PBX, but as soon as I
do
=> that, the PBX starts showing LOS and CRC.  Move it back to the line
and
=> it works again.

=> controller T1 3/0
=>  framing esf
=>  linecode b8zs
=>  pri-group timeslots 1-24 service mgcp
     
    clock source line primary/secondary on appropriate line would
probably help.

-- 
k.