[cisco-voip] Modems / Faxes

[Josh Duffek]

It's been awhile...but it sounds like the PBX clock isn't sync'd to the
telco.  Can you not set the PRIs going to the PBX to line?

josh duffek    network engineer
consultantjd16 at ridemetro.org

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-
> bounces at puck.nether.net] On Behalf Of Voll, Scott
> Sent: Wednesday, October 27, 2004 2:42 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Modems / Faxes
> 
> I'm online with TAC right now, but I thought I would throw the
question
> out there.
> 
> I'm getting clock from the telco on three PRIs.  I used the primary,
> secondary etc. on them.  Then I try to set internal to the PBX (other
3
> PRIs) so that it gets the clock from the PSTN to the PBX.  PBX vendor
> says he's getting clock slip.  We put one of the PRIs back to the PSTN
> and seemed to fix problem.  So any Ideas?  I'm running a CMM with
> 12.3.8xy code running CM 3.3.4sr2.
> 
> Could this be a Modem / FAX configuration on the CMM IOS GW?
> 
> TIA
> 
> Scott
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip