[cisco-voip] 7905G phone does not boot up

[Nick Marus]

I've had this happen before on some 7905's that are attached to ports
at 100Full. Setting the ports to 100half or back to auto has fixed it
for me.


On Thu, 28 Oct 2004 14:52:41 +0200, Faus, Francisco Jose (Francisco)
<faus at lucent.com> wrote:
> We have a new 7905G that does not boot up properly and keeps on lightening
> the HOLD (RED) and Menu (Green) buttons while the screen remains blank.
> 
> I think this happens since the first time we switched it to our LAN to
> register it with CCM (3.3.4) it was accidentally powered off. Maybe this
> corrupted the load or boot image?
> 
> Using a sniffer I can only see that the phone is continously requesting
> DHCP, receives the IP settings (I have configured a DHCP server to assign
> also the TFTP server address) and broadcasts 3 CDP messages without any
> answer.
> 
> It doesn't try to TFTP anything either so I don't know whether an image
> reload is still possible.
> 
> Is this phone recoverable? Any hint?
> 
> Thanks in advance.
> Francisco
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


-- 
Nick Marus
nmarus at gmail.com