[cisco-voip] SIP - Hint

[Klaus Darilion]

2: yes.
an outgoing voip dial-peer uses per default h323 unless you configure 
"session protocol sipv2". Therefore, make 2 dial-peers, one with h323 
and one with sip.

klaus

Babidii wrote:

> hi,
> 
> 1 - Im new in SIP with Cisco and i would like to know if
> someone have some simple link talking about this topic (for
> cisco) and configuration samples.
> 
> 2 - Can a gateway support two kinds of protocol? (I have a
> c5300 with 2 e1's and for the first e1 I would like to
> originate/terminate calls using the h323 protocol and the
> second e1 orignate/terminate calls using SIP) is that
> possible?
> 
> 
> Thanks,
> 
> Babidii
> 
> 
> 	
> 	
> 		
> _______________________________________________________
> Yahoo! Acesso Grátis - navegue de graça com conexão de qualidade! 
> http://br.acesso.yahoo.com/
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
>