[cisco-voip] international dialing

[Hering, Marc]

How are you tagging your calls International? I had a similar problem
and had to setup a translation rule to tag the outgoing calls
International......(Depends on the carrier tho) 


Marc Hering
Network Engineer
The Gale Company
100 Campus Drive
Suite 200
Florham Park, NJ 07932
Direct: 973.301.8209
Direct Fax: 973.236.2150
www.thegalecompany.com

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Behl
Sent: Tuesday, September 14, 2004 12:34 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] international dialing

I'm trying to dial a London number but failing.  Debug shows:

        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98395
                Exclusive, Channel 21
        Calling Party Number i = 0x2181, '8055685555
                Plan:ISDN, Type:National
        Called Party Number i = 0x91, '011442079365555'
                Plan:ISDN, Type:International *Apr  2 19:18:09.828: ISDN
Se1/0:23 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x93D2
        Cause i = 0xC284 - Vacant code or prefix digit not dialed


Anyone know what 'Vacant code or prefix digit not dialed' means?  I'm
guessing that 'vacant code' means the number doesn't exist, yet i'm able
to get through using the same number on my cell phone.  any help would
be appreciated.

(the numbers have been changed to protect the innocent)

jeff
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
 
 
 
 
 
 
 
The Gale Company is one of the largest real estate companies in the industry with a global portfolio exceeding 60 million square feet of office space.  For more information contact 973-301-9500 or visit www.TheGaleCompany.com