[cisco-voip] Translate-outgoing calling in Radius

[Klaus Darilion]

You can also set translation rules on the POTS PSTN port. May be this 
works as the number will be translated before entering the incoming dial 
peer.

voice-port 0:D
  translate called 1


klaus

Aydin Pirinccioglu wrote:
> Hi guys,
> 
> I've setup a calling card GW app on a Cisco AS5350.  I've got all working except CallerID Authentication by the AAA Server.  I have setup a translation rule that works when I test in on the GW.  This translation rule is in the dial-peer with the application.
> 
> I have not been able to find a way to get the CallingNumber sent to the Radius Server for AAA to be the translated Calling number.  Anyone know of a way to get the translated (E164) CallingNumber to be used instead of the original number?
> 
> 
> Thanks
> 
> Aydin
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip