[cisco-voip] Translate-outgoing calling in Radius

[Aydin Pirinccioglu]

BINGO :-)

Thanks Klaus, this works perfectly.

To summarize: using translate-outgoing calling in just the dial-peer voice
pots didn't translate the CallingNumber/CallerID sent to the Radius server
for authentication.  Using translate-outgoing calling in the voice-port
fixed my problem.

Thanks again

Aydin




----- Original Message ----- 
From: "Klaus Darilion" <klaus.mailinglists at pernau.at>
To: "Aydin Pirinccioglu" <aydin at verscom.com>
Cc: <cisco-voip at puck.nether.net>
Sent: Monday, September 27, 2004 12:46 AM
Subject: Re: [cisco-voip] Translate-outgoing calling in Radius


> You can also set translation rules on the POTS PSTN port. May be this
> works as the number will be translated before entering the incoming dial
> peer.
>
> voice-port 0:D
>   translate called 1
>
>
> klaus
>
> Aydin Pirinccioglu wrote:
> > Hi guys,
> >
> > I've setup a calling card GW app on a Cisco AS5350.  I've got all
working except CallerID Authentication by the AAA Server.  I have setup a
translation rule that works when I test in on the GW.  This translation rule
is in the dial-peer with the application.
> >
> > I have not been able to find a way to get the CallingNumber sent to the
Radius Server for AAA to be the translated Calling number.  Anyone know of a
way to get the translated (E164) CallingNumber to be used instead of the
original number?
> >
> >
> > Thanks
> >
> > Aydin
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>