[cisco-voip] Help with DID not working on PRI

[Voll, Scott]

I started having a problem with a DID yesterday.  The DID has always
worked but know it's giving a fast busy.  All other DIDs (400) seem to
be working over the three PRIs to the PSTN.   I'm running CM 4.1.2sr1.
The DID is on an ATA186 but I have removed the DID all together and
still having the same problem.

Here is an ISDN Q931 debug:

Apr  1 16:21:43.747: ISDN Se3/0:23 Q931: RX <- SETUP pd = 8  callref =
0x0328
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98393
                Exclusive, Channel 19
        Progress Ind i = 0x8283 - Origination address is non-ISDN
        Calling Party Number i = 0x2183, '5035084911'
                Plan:ISDN, Type:National
        Called Party Number i = 0x80, '9490'
                Plan:Unknown, Type:Unknown
Apr  1 16:21:43.755: ISDN Se3/0:23 Q931: TX -> SETUP_ACK pd = 8  callref
= 0x8328
        Channel ID i = 0xA9
Cat6K#8393
                Exclusive, Channel 19
Apr  1 16:21:43.783: ISDN Se3/0:23 Q931: RX <- STATUS pd = 8  callref =
0x0328
        Cause i = 0x82E1 - Message type not implemented
        Call State i = 0x06
Apr  1 16:21:43.783: ISDN Se3/0:23 Q931: TX -> DISCONNECT pd = 8
callref = 0x8328
        Cause i = 0x80E5 - Message not compatible with call state
Apr  1 16:21:43.943: ISDN Se3/0:23 Q931: RX <- RELEASE pd = 8  callref =
0x0328
Apr  1 16:21:43.947: ISDN Se3/0:23 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x8328

What does "Message type not implemented" Mean?  Any help would be great.

Thanks

Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050401/1d56d961/attachment-0001.html