[cisco-voip] Help with DID not working on PRI

[Lelio Fulgenzi]

RE: [cisco-voip] Help with DID not working on PRIif you do a route plan dump to a text file you should find it right away.

  ----- Original Message ----- 
  From: Voll, Scott 
  To: Voll, Scott ; cisco-voip at puck.nether.net 
  Sent: Friday, April 01, 2005 11:33 AM
  Subject: RE: [cisco-voip] Help with DID not working on PRI


  Interesting find.  Since I removed the DID from the ATA, I was going to make a Translation pattern and now it gives me a message that it's uses somewhere else.  Any ideas how to find it quickly?  

  Scott



  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
  Sent: Friday, April 01, 2005 8:28 AM
  To: cisco-voip at puck.nether.net
  Subject: [cisco-voip] Help with DID not working on PRI

  I started having a problem with a DID yesterday.  The DID has always worked but know it's giving a fast busy.  All other DIDs (400) seem to be working over the three PRIs to the PSTN.   I'm running CM 4.1.2sr1.  The DID is on an ATA186 but I have removed the DID all together and still having the same problem.

  Here is an ISDN Q931 debug:

  Apr  1 16:21:43.747: ISDN Se3/0:23 Q931: RX <- SETUP pd = 8  callref = 0x0328

          Bearer Capability i = 0x8090A2

                  Standard = CCITT

                  Transer Capability = Speech

                  Transfer Mode = Circuit

                  Transfer Rate = 64 kbit/s

          Channel ID i = 0xA98393

                  Exclusive, Channel 19

          Progress Ind i = 0x8283 - Origination address is non-ISDN

          Calling Party Number i = 0x2183, '5035084911'

                  Plan:ISDN, Type:National

          Called Party Number i = 0x80, '9490'

                  Plan:Unknown, Type:Unknown

  Apr  1 16:21:43.755: ISDN Se3/0:23 Q931: TX -> SETUP_ACK pd = 8  callref = 0x8328

          Channel ID i = 0xA9

  Cat6K#8393

                  Exclusive, Channel 19

  Apr  1 16:21:43.783: ISDN Se3/0:23 Q931: RX <- STATUS pd = 8  callref = 0x0328

          Cause i = 0x82E1 - Message type not implemented

          Call State i = 0x06

  Apr  1 16:21:43.783: ISDN Se3/0:23 Q931: TX -> DISCONNECT pd = 8  callref = 0x8328

          Cause i = 0x80E5 - Message not compatible with call state

  Apr  1 16:21:43.943: ISDN Se3/0:23 Q931: RX <- RELEASE pd = 8  callref = 0x0328

  Apr  1 16:21:43.947: ISDN Se3/0:23 Q931: TX -> RELEASE_COMP pd = 8  callref = 0x8328

  What does "Message type not implemented" Mean?  Any help would be great.

  Thanks

  Scott



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050401/33bd5dc3/attachment-0001.html