[cisco-voip] Help with DID not working on PRI

[Voll, Scott]

Thanks Lelio-

 

I found it not attached to anything.  So I deleted it and added it to my
7960 as a DID and get fast busy again.  But if I delete that and make a
translation pattern it works.  Any ideas why I can't add it to a device
as a DID?

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, April 01, 2005 8:46 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Help with DID not working on PRI

 

if you do a route plan dump to a text file you should find it right
away.

 

	----- Original Message ----- 

	From: Voll, Scott <mailto:Scott.Voll at wesd.org>  

	To: Voll, Scott <mailto:Scott.Voll at wesd.org>  ;
cisco-voip at puck.nether.net 

	Sent: Friday, April 01, 2005 11:33 AM

	Subject: RE: [cisco-voip] Help with DID not working on PRI

	 

	Interesting find.  Since I removed the DID from the ATA, I was
going to make a Translation pattern and now it gives me a message that
it's uses somewhere else.  Any ideas how to find it quickly?  

	Scott

	 

	From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
	Sent: Friday, April 01, 2005 8:28 AM
	To: cisco-voip at puck.nether.net
	Subject: [cisco-voip] Help with DID not working on PRI

	I started having a problem with a DID yesterday.  The DID has
always worked but know it's giving a fast busy.  All other DIDs (400)
seem to be working over the three PRIs to the PSTN.   I'm running CM
4.1.2sr1.  The DID is on an ATA186 but I have removed the DID all
together and still having the same problem.

	Here is an ISDN Q931 debug:

	Apr  1 16:21:43.747: ISDN Se3/0:23 Q931: RX <- SETUP pd = 8
callref = 0x0328

	        Bearer Capability i = 0x8090A2

	                Standard = CCITT

	                Transer Capability = Speech

	                Transfer Mode = Circuit

	                Transfer Rate = 64 kbit/s

	        Channel ID i = 0xA98393

	                Exclusive, Channel 19

	        Progress Ind i = 0x8283 - Origination address is
non-ISDN

	        Calling Party Number i = 0x2183, '5035084911'

	                Plan:ISDN, Type:National

	        Called Party Number i = 0x80, '9490'

	                Plan:Unknown, Type:Unknown

	Apr  1 16:21:43.755: ISDN Se3/0:23 Q931: TX -> SETUP_ACK pd = 8
callref = 0x8328

	        Channel ID i = 0xA9

	Cat6K#8393

	                Exclusive, Channel 19

	Apr  1 16:21:43.783: ISDN Se3/0:23 Q931: RX <- STATUS pd = 8
callref = 0x0328

	        Cause i = 0x82E1 - Message type not implemented

	        Call State i = 0x06

	Apr  1 16:21:43.783: ISDN Se3/0:23 Q931: TX -> DISCONNECT pd = 8
callref = 0x8328

	        Cause i = 0x80E5 - Message not compatible with call
state

	Apr  1 16:21:43.943: ISDN Se3/0:23 Q931: RX <- RELEASE pd = 8
callref = 0x0328

	Apr  1 16:21:43.947: ISDN Se3/0:23 Q931: TX -> RELEASE_COMP pd =
8  callref = 0x8328

	What does "Message type not implemented" Mean?  Any help would
be great.

	Thanks

	Scott

	
________________________________


	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050401/8d0bf349/attachment.html