[cisco-voip] installing the Operating System on the Cisco IP Telephony Application Server

[Wes Sisk]

CallManager only supports 1 active IP address on the server (not 
counting loopbac, 127.0.0.1).
So any servers with dual NICs have the 2nd NIC disabled.

If it is an HPQ server that supports NIC teaming, you can team the NICs 
but you cannot have both adapters with individual IP addresses.

/Wes

tdl lokuba wrote:

> Hi All,
>  
> When I'm installing the Operating System on the Cisco IP Telephony 
> Application Server it install two Network Adaptors.
> The first one is already configured with IP address that configured at 
> installation, but not visible with TCP/IP properties.
> The second one is configured with Obtain IP Address automatically.
> Only the visible adaptor with Local Area Connection Properties is the 
> Adaptor #2 ( Broadcom NetXtreme Gigabit Ethernet #2 )
>  
> Since I am new for the subject I don't have clear idea on that, Please 
> can anybody give comment on that.
>  
> Regards,
>  
> Thusitha
>
> ------------------------------------------------------------------------
> Do you Yahoo!?
> Yahoo! Sports - Sign up 
> <http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=31508/*http://baseball.fantasysports.yahoo.com> 
> for Fantasy Baseball.
>
>------------------------------------------------------------------------
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>  
>