[cisco-voip] [semi-OT] ISDN, secondary number and calling-number

[Andrea Riela]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi folks,

I've an EU ISDN multipoint with 2 numbers and a ccme with nt-te card.
Well, I would that ipphone A calls out with calling ID 111 (first ISDN 
number), and ipphone B with calling ID 222 (the second).
Obviously, if I put the 'isdn calling-number 111' on bri0/0, the calls 
from ipphone B too will have the same ID.
I'm thinking about secondary number on ephone-dn, and 'calling-number 
local secondary', but it doesn't work, the calls from B too go out with 
ID 111, even if I don't use a specific calling-number on my bri.

That's possible? where is my mistake?
I hope that's clear.

Thanks for any suggestion
Regards
Andrea
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Darwin)

iD8DBQFCUysXMakHrsrHP9wRAlMRAKDkVhHXFPUItY476pfUzyCthnZ1fACeLZlR
dfMulGvp2iM0VcBSeQaew1A=
=gCsl
-----END PGP SIGNATURE-----