[cisco-voip] AS5400-HPX platform restriction

[Ryan Fields]

Hi All,

We are currently running voip service using an AS5400-HPX
and would like to have off-ramp faxing as well.  I did a couple
of tries of having both voice calls and off-ramp process at the
same time.  So far its working fine but to be on the safe side
and not degrade its performance, I'd like to find its platform 
restrictions. How can I verify the maximum simultaneous 
store-forward session it can process with or without voice calls 
or any other type of  fax (relay/passthru) taking place.

Below is the version output:

Cisco AS5400HPX (R7K) processor (revision T) with 262144K/65536K bytes
of memory.
R7000 CPU at 390MHz, Implementation 39, Rev 3.3, 256KB L2, 8192KB L3 Cache
Manufacture Cookie Info:
 EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x31,
 Board Hardware Version 16.7, Item Number 800-16091-01,
 Board Revision C0
 PLD/ISP Version 2.2,  Manufacture Date 21-Feb-2003.
Processor 0x14, MAC Address 0x0BFDA2326
Backplane HW Revision 1.0, Flash Type 3.3V
2 FastEthernet interfaces
394 Serial interfaces
384 terminal lines
16 Channelized T1/PRI ports
512K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102

Thanks,
Ryan