[cisco-voip] *fixed* 7.1(2) shared line call answer issue if not primary line

[Erick Bergquist]

FYI,

The problem with this, was part of bug id CSCsa69644.
The interim firmware with fix is P0030701T018.
7.2(1) will have fix.

--- Erick Bergquist <erickbe at yahoo.com> wrote:

> > The problem encountered with the 7940/7960 7.1(2)
> > phone load was with answering an incoming call on
> > any
> > Line other than the Primary Line. Prior to 7.1(2)
> a
> > call coming in on any line could be answered by
> > picking up the handset and the phone would
> > automatically seek out the first active (ringing)
> > line
> > on the set.  With the new load, if a call comes in
> > on
> > any line other than the primary line the user must
> > press the button for the ringing line after
> picking
> > up
> > the handset to answer that call.   For example, 
> if
> > the user has several shared lines on a 7914 side
> car
> > and a call comes in on one of those shared lines
> the
> > user must first pickup the handset and then press
> > the
> > button on the side car for the ringing line. 
> Prior
> > to
> > 7.1(2) a ringing line on the 7914 could be
> answered
> > by
> > merely picking up the handset.  The phone would
> > connect you to the ringing line without any manual
> > intervention.



		
__________________________________ 
Do you Yahoo!? 
Plan great trips with Yahoo! Travel: Now over 17,000 guides!
http://travel.yahoo.com/p-travelguide