[cisco-voip] h323 gateway with 2811 without gatekeeper?

[Steven E. Ames]

That should be very doable. I think you can do it with one dial-peer even:

dial-peer voice 2101 pots
 description Incoming VoIP calls
 huntstop
 preference 1
 application session
 destination-pattern T
 direct-inward-dial
  port 1/0:23
!

And it should just work. (This is T1 config but it does work).

-Steve

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of riki
> Sent: Monday, April 18, 2005 12:03 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] h323 gateway with 2811 without gatekeeper?
> 
> 
> Hello,
> 
> i have cisco 2811 with 2800 Software 
> (C2800NM-SPSERVICESK9-M), Version 
> 12.3(8)T6, RELEASE SOFTWARE (fc2) with VWIC-1MFT-E1 and 2x PVDM16
> 
> I want to accept incoming h323 call and translate it into 
> outgoing call 
> on one of 31 channels on E1 interface
> 
> Is it possible to do this without gatekeeper, because i found only 
> setups with gk. If yes, can you provide me some links on this topic?
> 
> Thanks for a response
> 
> r.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>