[cisco-voip] Setting ip Multicast for MOH

[Kevin Thorngren]

Hi Jesse,

What is your goal with the Multicast MoH?

Are you needing the Multicast traffic to go further than the directly 
connected subnets?

Kevin
On Apr 18, 2005, at 3:14 PM, King, Jesse wrote:

> Okay -
>  
> I have 1760-v's in branches connected to 3550's.
>  
> On branch routers, in order to setup multicast routing
>   
> ip multicast-routing
>  
> and under the interface - serial? or fast eth?
>   
> ip pim dense-mode
>  
>  
> Is this all I need, or do I need to set the router to be in a 
> particular group. We are not using multicast for anything else.
>  
> I am in the process of reading 'Configuring IP Multicast Routing', and 
> it says those two commands are required, others are optional.. Is that 
> really the case? and if so, which interface do I need to have the ip 
> pim set on, and is dense-mode the correct mode I should be using?
>  
> Thoughts?
>  
> Thanks.
>  
> Jesse
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 1880 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20050418/79caa202/attachment.bin