[cisco-voip] Disconnect connected call on FXO port automatically

[Lelio Fulgenzi]

The Bogen TAM-B has a setting for maximum page time. It doesn't help you now, but maybe for future purchases?

-----                                                                -----
Lelio Fulgenzi, B.A.                                  lelio at uoguelph.ca.eh
Network Analyst (CCS)
University of Guelph                             FAX:(519) 767-1060 JNHN
Guelph, Ontario N1G 2W1                          TEL:(519) 824-4120 x56354
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
mob lawyer: your people insulted my brother.
dr. house: what? romano in the parmesan cheese shaker again?
  ----- Original Message ----- 
  From: Erick Bergquist 
  To: cisco-voip at puck.nether.net 
  Sent: Thursday, April 21, 2005 6:18 PM
  Subject: [cisco-voip] Disconnect connected call on FXO port automatically 


  Does anyone know if there is a way on the router, or
  on CCM to end a connected call on a FXO voice-port
  automatically after call has been active for a period
  of time?

  Client has FXO ports connecting to Valcom 200 paging
  system with FXO LoopStart and the users call paging
  system and page but walk away and put handset down and
  don't hang up the phone so calls stay connected and
  tie up paging ports.

  We've addressed the user/training part of issue but it
  continues so looking for a technical fix to this if
  possible. 

  __________________________________________________
  Do You Yahoo!?
  Tired of spam?  Yahoo! Mail has the best spam protection around 
  http://mail.yahoo.com 
  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050421/0d21c65a/attachment.html