[cisco-voip] Disconnect connected call on FXO port automatically

[Wes Sisk]

not natively,

a couple of creative solutions:
1. tcl script
2. script wrapped in a cron job that connects up every 5 mins, parses a 'sh
call act voice' for calls that are active too long, and then shuts/no shuts
the voice port.  crude, but effective.

/Wes

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Erick Bergquist
Sent: Thursday, April 21, 2005 6:19 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Disconnect connected call on FXO port
automatically


Does anyone know if there is a way on the router, or
on CCM to end a connected call on a FXO voice-port
automatically after call has been active for a period
of time?

Client has FXO ports connecting to Valcom 200 paging
system with FXO LoopStart and the users call paging
system and page but walk away and put handset down and
don't hang up the phone so calls stay connected and
tie up paging ports.

We've addressed the user/training part of issue but it
continues so looking for a technical fix to this if
possible.

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip