[cisco-voip] IBM 345 and upgrade

[Lelio Fulgenzi]

Did you check the upgrade document for servers that support upgrading with a drive removed? I recall there were some IBMs that did not support this. You will need to insert another drive after you removed your backup if your server does not support upgrading with only one drive.

-----                                                                -----
Lelio Fulgenzi, B.A.                                  lelio at uoguelph.ca.eh
Network Analyst (CCS)
University of Guelph                             FAX:(519) 767-1060 JNHN
Guelph, Ontario N1G 2W1                          TEL:(519) 824-4120 x56354
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
mob lawyer: your people insulted my brother.
dr. house: what? romano in the parmesan cheese shaker again?
  ----- Original Message ----- 
  From: Shane Rogers 
  To: cisco-voip at puck.nether.net 
  Sent: Friday, April 22, 2005 7:29 PM
  Subject: [cisco-voip] IBM 345 and upgrade


  Anyone had any issues with the IBM 345 mirrored drives?

  I pulled one drive out before I do my 3.3.x to 4.1 upgrade. Just incase something goes wrong.  Then I started the server back up chose F10 on the error saying it saw the mirror was broken but I want to continue without any changes.  Well it then only wants to boot to the floppy drive.  I'm at a loss here.  Anyone?

  Shane


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050422/4e4f947f/attachment.html