[cisco-voip] Cisco Call Manager : H.323 Support

[Ozcan YILDIZ]

Hello.

1.Yes; you can setup Cisco CallManager as a Gatekeeper. But you cannot see
the terminals or gateways as registered to Cisco Call Manager. Cisco call
manager act as a Gatekeeper, But not like a Gatekeeper. it can forward calls
over itself Using port 1720.

2.Yes You can configure Cisco Callmanager with any gatekeeper . All you you
have to do is  route the call between Gatekeeper and callmanager.

3.Yes you can setup Netmeeting by using gateway option in Netmeeting. Not
Gatekeeper option.

4. You have to find H323 image for Ip Phones and put them to TFTP server .

 

Regards.

 

 

Ozcan YILDIZ

General Manager

 

AcademyTech Training and Consultancy Services

Tel: + 90 (216) 349 23 11 (pbx)

Fax: + 90 (216) 349 24 39

E-mail : ozcanyildiz at academytech.com

URL:  <http://www.academytech.com/> http://www.academytech.com

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
anil.pathak at flextronicssoftware.com
Sent: Wednesday, April 27, 2005 10:37 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cisco Call Manager : H.323 Support

 


Hi All, 
We have recently bought Cisco Call Manager (4.1) and we have couple of 
questions: 

[1] Can Cisco Call Manager be configured as H.323 Gatekeeper? If yes how? 

[2] Can any third-party Gatekeeper (not Cisco) be interfaced with Cisco Call
Manager? 
Does simply adding "Add Gatekeeper" to Cisco Call Manager would serve the
purpose? 
If not then how? 

[3] Can we place call between Cisco Call Manager and Microsoft NetMeeting
directly? 
[With out any Gatekeeper] 

[4] Can Cisco Phone 7940/7960 be configured to use H.323 Protocol and
interface with 
Cisco Call Manager? 

Early response would be great help to us. 

Regards, 
Anil Pathak

***********************  FSS- Confidential   *********************** 


"DISCLAIMER: This message is proprietary to Flextronics Software 
Systems Limited (FSS) and is intended solely for the use of the  
individual to whom it is addressed. It may contain  privileged or 
confidential information and should not be circulated or used for 
any purpose other than for what it is intended. If you have received 
this message in  error, please notify the originator immediately. 
If you are not the intended recipient, you are notified that you are
strictly  prohibited  from  using, copying, altering, or disclosing
the contents of this message.  FSS  accepts no  responsibility  for
loss or damage arising from the use of  the information transmitted
by this email including damage from virus."

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050427/dcd069a0/attachment-0001.html