[cisco-voip] RE: [c-nsp] Unity Voice mail

[Voll, Scott]

Can you put a translation rule in to trunk the prefix and just pass the
4 digits?

IE.  xxxxxx.xxxx pre-dot

Scott

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Scott Ingram
Sent: Wednesday, April 27, 2005 7:25 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Unity Voice mail 

I have a remote site that is using MGCP back hauling the PRI and CM
functions to the home office.  When I do a 4 digit dial to a number it
will go into voice mail however, when I long dial the same number (area
code) XXX.XXXX the call will not go into voicemail it just goes to dead
air.  I did a MGCP restart on the spoke site gateway.

 

Scott Ingram

Manager of Network operations and Design

Clayton Services, Inc

T: 203-926-8148

F: 203-926-5751

singram at clayton.com

 

 

 


IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to
which it is addressed and may contain information that is privileged,
confidential and exempt from disclosure under applicable law.  If you
have received this message in error, you are hereby notified that we do
not consent to any reading, dissemination, distribution or copying of
this message.  If you have received this communication in error, please
notify the sender immediately and destroy the transmitted information.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/