[cisco-voip] FW: Unity Voice mail

[Scott Ingram]

I have a remote site that is using MGCP back hauling the PRI and CM
functions to the home office.  When I do a 4 digit dial to a number it
will go into voice mail however, when I long dial the same number (area
code) XXX.XXXX the call will not go into voicemail it just goes to dead
air.  I did a MGCP restart on the spoke site gateway.

 


IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law.  If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message.  If you have received this communication in error, please notify the sender immediately and destroy the transmitted information.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050427/732c7282/attachment.html