[cisco-voip] Multiple Scopes Config for DHCP Server

[Voll, Scott]

Setup our DHCP scopes and then on the router on each layer 3 interface
put ip helper-address x.x.x.x (IP address of DHCP server).

That should be all you need.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nasser Khwaja
Sent: Tuesday, April 26, 2005 5:05 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Multiple Scopes Config for DHCP Server

Hi,
I need to setup about 20 scopes on a Windows 2000 DHCP Server at a
Central CallManager site so that the IP Phones and PCs at the 20
remote sites pull up their respective Subnet/Vlan IP Addresses.
Any tips for the Server/Router/Vlan Switch port config will be highly
appreciated.
Thanks
-Nasser.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip