[cisco-voip] Multiple Scopes Config for DHCP Server

[Marc Hering]

Not much to do on the switching side...but on the routers make sure that
the ip helper-address is setup so that the router knows where to forward
the DHCP requests to..

<M> 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nasser Khwaja
Sent: Tuesday, April 26, 2005 8:05 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Multiple Scopes Config for DHCP Server

Hi,
I need to setup about 20 scopes on a Windows 2000 DHCP Server at a
Central CallManager site so that the IP Phones and PCs at the 20 remote
sites pull up their respective Subnet/Vlan IP Addresses.
Any tips for the Server/Router/Vlan Switch port config will be highly
appreciated.
Thanks
-Nasser.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip