FW: [cisco-voip] SRST - prevent 7940s from registering

[Boda György]

SRST 3.1 didn't accept it.


Cisco2610xm(config-cm-fallback)#limit-dn 7940 0
                                     ^
% Invalid input detected at '^' marker.

Thanks.

Gyorgy

-----Original Message-----
From: Brad Vonarx [mailto:bvonarx at gmail.com] 
Sent: 2005. augusztus 3. 17:44
To: Boda György
Subject: Re: [cisco-voip] SRST - prevent 7940s from registering

You can use the following commands to achieve this.....

call-manager-fallback
  limit-dn 7940 0
 
This will not allow any 7940's to register, or like Wes said you can
also create a seperate device pool with no SRST.
 
Cheers
   Brad

On 8/3/05, Boda György <gyorgy.boda at nextiraone.hu> wrote:
> 
> 
> Hi,
> 
> I would like to prevent 7940s from registering with the ISR in SRST mode and
> allow only 7960s and ATAs to register. 
> 
> The #max-ephone - command cannot differentiate between phone types.
> 
> Thanks. 
> 
> Gyorgy 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
>