[cisco-voip] how to send caller id on ccme

[Boda György]

ANI can be set on a number of places in CME:

 

ephone-dn 1 dual-line       

number 9889

name Ph1JohnDoe  //ANI

 

 

voice-port 1/0/1

station-id name FAX    //ANI

station-id number 9888             //ANI

caller-id enable             //ANI

 

dial-peer voice 3 voip

destination-pattern 1876.......$              

session target ipv4:172.16.225.2

clid strip name  //blocks ANI name for external calls

clid strip  //blocks ANI number

 

 

E1 R2

 

controller E1 1/0

  framing NO-CRC4

  clock source internal

  ds0-group 1 timeslots 1-4 type r2-digital r2-compelled ani      //ANI

 

H.323 GW T1-CAS

 

controller T1 1/0

 framing esf

 linecode b8zs

 ds0-group 0 timeslots 1-4 type fgd-eana          //ANI

 

Regards,

 

Gyorgy

 

  _____  

From: AA [mailto:jgrace at digitelusa.net] 
Sent: 2005. augusztus 3. 22:31
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] how to send caller id on ccme

 

we have a ccme, and i need to configure it to send out caller id.  Im not sure were to configure it and how.  

James Grace 
System Engineer /Professional Srvc.
MCSE MCSA MCDBA CCNA CCNP CQS

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050804/40a9fab6/attachment.html